Bosch CST1 1/2-Inch Titanium Countersink

Bosch CST1 1/2-Inch Titanium Countersink Review

See more picture

Bosch CST1 1/2-Inch Titanium Countersink Feature

• Self Starting Point, starts on contact
• Balanced Double Flute Eliminates chatter and vibration
• Trailing Flute Automatically deburrs holes
• Resharpenable Cutting Edge enables Longer tool life

Bosch CST1 1/2" Titanium CountersinkBosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch CST1 1/2" Titanium Countersink Features:; Bosch countersinks are great for deburring and chamfering openings to pre-drilled holes. Cuts are clean and accurate in even the toughest materials. ; Titanium Coated Countersinks ; Item # CST1; Diameter 1/2 ; Chamfer Angle 82 °; Shank Diameter 1/4 ; Number of Flutes 5

Check price now

Festool 496942 Centrotec 8-Piece Imperial Wood Drill Bit Set With Countersink

Festool 496942 Centrotec 8-Piece Imperial Wood Drill Bit Set With Countersink Review

See more picture

Festool 496942 Centrotec 8-Piece Imperial Wood Drill Bit Set With Countersink Feature

• 8-piece Imperial drill bit set includes Centrotec Pilot-less Countersink
• Precision-ground HSS steel stays sharp longer for precise hole drilling and a long service life
• Brad-point bits with spur-less tip design and beveled chamfers deliver cleaner, more precise drilling results
• Sharp, hollow flute design improves chip ejection while reducing friction and heat for longer cutting life and cleaner finished holes
• Centrotec design can be used with Centrotec Chuck System, or with any three-jaw keyless chuck system

Includes Imperial Wood Drill Set, Drill Bits - 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/16" - 19/32" Countersink, Centrotec 1/4" Hex Shank

Check price now

Vix-Bit 9VIXBIT Self Centering Pre-Drill Bit for 9/64-Inch Hinges and #8, #9, and #10 screws

Vix-Bit 9VIXBIT Self Centering Pre-Drill Bit for 9/64-Inch Hinges and #8, #9, and #10 screws Review

See more picture

Vix-Bit 9VIXBIT Self Centering Pre-Drill Bit for 9/64-Inch Hinges and #8, #9, and #10 screws Feature

• Pre-drill bit for 9/64-inch hinges #8, #9, and #10 screws
• Accurately drills holes for hinges, door butts, window pulls, window latches, door latch bolts, striker plates, and more
• Precision built; hardened drill guide
• For use on all hardware that uses screws
• Weighs .8-ounces; made in the USA

This pre-drill bit from Vix-Bit saves hours of time by accurately drilling holes for hinges, door butts, window pulls, window latches, door latch bolts, striker plates, and all other hardware using screws. Precision built with a hardened drill guide, it tears through wood, metal, plastic and more. This bit is for use with 9/64-inch hinges and no. 8, 9, and 10 screws.


This pre-drill bit saves hours of time by accurately drilling holes for hinges, door butts, window pulls, window latches, door latch bolts, striker plates, and all other hardware using screws. The bit is for use with 9/64-inch hinges and no. 8, 9, and 10 screws.

Check price now

Magafor 1961600 196 Series 2 Flute, 120 Degrees Cutting Angle, 0.630" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1961600 196 Series 2 Flute, 120 Degrees Cutting Angle, 0.630" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1961600 196 Series 2 Flute, 120 Degrees Cutting Angle, 0.630" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

Magafor 1970800 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.315" Cutting Length, 5-1/2"Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1970800 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.315" Cutting Length, 5-1/2"Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1970800 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.315" Cutting Length, 5-1/2"Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

Flushmount Drill Bit (9/16)

Flushmount Drill Bit (9/16) Review

See more picture

Flushmount Drill Bit (9/16) Feature

• Ball bearing stop collar that controls the recess depth the drill creates
• Adjustable 1/8" pilot bit
• Macro depth adjust
• Micro depth adjust
• Micro adjust locking thumb screw

Drill a pilot hole and countersink for your 9/16" FastCap PowerHead screws in one operation without marring the surface of your work piece! The Flushmount Drill Bit System incorporates a unique adjustable ball bearing stop collar that controls the recess depth created by the drill. You can set the countersink depth to match the exact thickness of whatever material youre using to cover the screw head so your caps are perfectly flush with the material surface. This bearing system allows the stop collar to stop spinning when it comes in contact with the surface youre drilling, preventing the surface from being damaged.

Check price now

Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set

Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set Review

See more picture

Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set Feature

• Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
• Back tapered beyond tap to prevent thread damage from over-drilling
• Deburr/countersink also provided on bit beyond back taper
• Made from hardened high-speed steel vs carbon steel for longer life
• Designed to tap up to 10-gauge metal

Drill/tap high-speed steel 6-32 to 1/4-20 six piece drill/tap set, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.Quick change adaptor included.

Check price now

MLCS 9192 High Speed Steel Tapered Drill Bit Countersink Set

MLCS 9192 High Speed Steel Tapered Drill Bit Countersink Set Review

See more picture

MLCS 9192 High Speed Steel Tapered Drill Bit Countersink Set Feature

• Includes 7 drill bits for most common screw sizes
• High quality high speed steel construction
• Allen key and wood storage box Included.

A tapered hole grips a screw along its entire length, giving exceptional thread 'bite', and less chance of a stripped hole from today's power screw drivers. Set includes: 7 tapered bits (for the common screw sizes 5, 6, 7, 8, 9,10,12), seven matching countersink heads with adjustable stop collars, Allen key and wood storage box.Includes 7 drill bits for most common screw sizesHigh quality high speed steel constructionAllen key and wood storage box Included.

Check price now

Magafor 1971600 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.630" Cutting Length, 8" Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1971600 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.630" Cutting Length, 8" Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1971600 197 Series 2 Flute, 90 Degrees Cutting Angle, 0.630" Cutting Length, 8" Long Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

Magafor 1950635 195 Series 2 Flute, 120 Degrees Cutting Angle, 1/4" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1950635 195 Series 2 Flute, 120 Degrees Cutting Angle, 1/4" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1950635 195 Series 2 Flute, 120 Degrees Cutting Angle, 1/4" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

Magafor 1950317 195 Series 2 Flute, 90 Degrees Cutting Angle, 1/8" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1950317 195 Series 2 Flute, 90 Degrees Cutting Angle, 1/8" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1950317 195 Series 2 Flute, 90 Degrees Cutting Angle, 1/8" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

DEWALT DD5018 9/32-Inch Impact Drill Bit - 1 Pack

DEWALT DD5018 9/32-Inch Impact Drill Bit - 1 Pack Review

See more picture

DEWALT DD5018 9/32-Inch Impact Drill Bit - 1 Pack Feature

• Ground from solid one piece design is up to 5 times more durable than the current 2 piece conventional product.
• Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
• Patented pilot point tip (3/16 -1/2) allows users to drill holes faster than the conventional split point product and offers clean burr free holes with reduced bit walking.
• Offers clean burr free holes with reduced bit walking
• 3.5-inches to 4-inches long

Brand new DeWalt Impact Drill Bit Features a patented web-taper which dramatically increases bit rigidity and reduces the chances of breakage Designed for use in a 1/4\" hex shank impact drivers to drill holes in metal, wood, or plastic Ideal for HVAC, mechanical, electrical, glaziers and general contractor work Patented Pilot Point tip drills holes faster than the standard split point tips Produces continuous, burr-free holes with reduced bit walking Longer Life, and decreased replacement cost for the user 30-Day Satisfaction Guarantee

Check price now

Bosch CC2460 Clic-Change 7-Piece Phillips Bit and Countersinking Set

Bosch CC2460 Clic-Change 7-Piece Phillips Bit and Countersinking Set Review

See more picture

Bosch CC2460 Clic-Change 7-Piece Phillips Bit and Countersinking Set Feature

• Quick change bit system for fast, one-handed load and release
• Change bits without re-chucking

Bosch CC2460 "Clic-Change" 7 Pc. Countersinking Set

Check price now

25PC QUICK CHANGE DRILL BIT SET BY SNAPPY

25PC QUICK CHANGE DRILL BIT SET BY SNAPPY Review

See more picture

25PC QUICK CHANGE DRILL BIT SET BY SNAPPY Feature

• Set includes 19 bits, 2 Allen wrenches, 1 hex collar, 2 stop collars (3/8" & 1/2") + pouch.
• The 19 bits are Snappy countersink sizes 5/64,3/32,7/64,1/8, & 9/64.
• Drill bit sizes; 1/16,3/32,1/8,5/32,3/16,7/32, & 1/4.
• Phillips Head Drivers # 1,2 & 3; plus Square Drivers # 1, 2 & 3 and 1 quick change chuck.
• All of the 25oc set is made in USA by Snappy.

Our premium set includes a Snappy quick change chuck, 7 drill bit adapters with drills, 5 countersinks, 3 Phillips Head Drivers, 3 Square Drivers, 2 Allen Wrenches, 1 Hex Collar, 2 Stop Collars and a handy canvas pouch to keep all your quick change tools together. This is a great start up set for converting standard drill bits to hex power bits. Made in USA by Snappy.

Check price now

Magafor 1950800 195 Series 2 Flute, 120 Degrees Cutting Angle, 0.315" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1950800 195 Series 2 Flute, 120 Degrees Cutting Angle, 0.315" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1950800 195 Series 2 Flute, 120 Degrees Cutting Angle, 0.315" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now

DEWALT DW2215 #2 Phillips and #2 Square Recess Double Ended Screwdriver Bit, 3 Pack

DEWALT DW2215 #2 Phillips and #2 Square Recess Double Ended Screwdriver Bit, 3 Pack Review

See more picture

The DeWalt DW2215 double end Phillips #2/square recess #2 bit is heat-treated to guarantee a bit hardness that stands up to any job. This advanced hardening process results in a stronger, more durable bit that provides higher torque and increased driving power. This pack includes 3 bits.

Check price now

Magafor 1910500 191 Series 2 Flute, 60 Degrees Cutting Angle, 0.197" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit

Magafor 1910500 191 Series 2 Flute, 60 Degrees Cutting Angle, 0.197" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Review

See more picture

Magafor 1910500 191 Series 2 Flute, 60 Degrees Cutting Angle, 0.197" Cutting Length Cobalt Steel Uncoated (Bright) Combination Spotting Drill And Countersink Bit Feature

• By using the magafor NC drill of diameter over the drilling tool, centering and chamfering are obtained in a single operation
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

MAGAFOR is recognized as a leader in the production of precision cutting tools. With more than 250 ranges and 8 000 dimensions, MAGAFOR offers the solution adapted to your machining. Forms, materials, lengths are as many criteria generating of the specific ranges

Check price now